Modified Starch For High Temperature (140ºC) SHR-1
Product Description
SHR is an environmentally friendly, low-viscosity filtration reducer with excellent salt resistance (up to saturation). It has been modified with starch by incorporating hydration groups and a high-temperature stabilizer to enhance water solubility and temperature resistance (up to 140 ºC), ensuring optimal fluid loss performance under both low and high temperatures. The recommended dosage is 3.0 - 7.0ppb.
Product Parameters
Items |
Specifications |
Appearance |
White or light yellow free-flowing powder |
Moisture, % |
≤12.0 |
AV after 130ºC aging, mPa·S |
40 g/l saltwater slurry |
≤10.0 |
Saturated saltwater slurry |
≤12.0 |
FLAPI after 130ºC aging, ml |
40 g/l saltwater slurry |
≤15.0 |
Saturated saltwater slurry |
≤20.0 |
FLAPI in 2% CaCl2 solution, mL |
≤10.0 |
Features
Perform well up to 140 ºC.
It is degradable, non-toxic and does not harm the environment.
Increase viscosity slightly.
Reduce filtration loss effectively.
Resist salt to saturation, reasonable calcium and magnesium resistance. so it can be applied in various drilling and completion fluids.
Good filtration control performance under the condition of both low and high temperature, and has wide applicable temperature range.
Package and Storage
They shall be packaged in 25kg multi-wall paper sacks. They shall be stored in a shady, dry, and ventilated place.
Safety
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with clean water.
Handling methods and dangerous data shall be referred to MSDS.
I . Filtration Reducer For WBM |
|
DSP-1 HTHP Polymer Filtration Reducer |
DSP-2 Polymer Filtration Reducer |
PAN-Trol Low Viscosity Copolymer Filtration Reducer |
PAN-Vis HT Polymer For Viscosity Increasing And Filtration Reducing |
SMP Sulfomethylated Phenolic Resin |
SMP-III Sulfomethylated Phenolic Resin |
SPNH Lignite Resin for Drilling Fluid |
LYS Modified Starch |
SHR-1 Modified Starch HT |
DACP Alkyl cellulose polysaccharide for drilling fluid |
II. Shale Inhibitor For WBM |
|
NP-1 Nano-polyester for Drilling Fluid |
NS-1 Nano-SiO2 |
FF-I Sulfonated Asphalt(High purity) |
FF-V Sulfonated Asphalt(Ecnomical) |
FF-III Emulsified Asphalt |
AP-1 Polyamine Shale Inhibitor |
POLYOL |
DLA-1 Aluminum Based Shale Inhibitor |
III. Lubricant For WBM |
|
HEP-1 EP Lubricant for High Density Mud |
EP-202 EP Lubricant for Drilling Fluid |
EP-204 Oil Base Lubricant for Drilling Fluid |
GR Solid Lubricant (Graphite base) |
IV. Thinner For WBM |
|
SF Silicon-fluorine Thinner |
DLST CF Chromium Free Lignosulfonate Thinner |
V. Lost Circulation Materials |
|
SDF3 Compounded LCM |
GWS-1 Delayed Expansion LCM |
HFD-1 Rapid Filtrating High Strength LCM |
VI. OBM Additives |
|
OME-1 Primary Emulsifier for OBM |
OME-2 Secondary Emulsifier for OBM |
OFC OBM Filtration Reducer |
OMP-1 Nano-Polymer Sealing Additive for OBM |
OMP-2 Expanded Graphite Plugging Agent for OBM |
VII.Defoamer For WBM |
|
Polyether Defoamer |
PD-100 Organosilicon Deformer |
VIII. Bactericide For WBM |
|
JM-1 Bactericide for Drilling Fluid |
IX. Filtration Reducer For Cementing |
|
DSPC-1 Filtration Reducer For Cementing |
DSPC-2 Filtration Reducer For Cementing |
X. Other Series |
|
SR301 Pipe Freeing Agent |
ZH-2 Corrosion Inhibitor for Drilling Fluid |